PRODUCTS
Combined Geogrid with Geotextile
Category:
Composite PP Biaxial Geogrid with Nonwoven geotextile
Get expert sales advice within 12 hours.
Chat with us now for a quick response.
keywords :
Composite PP Biaxial Geogrid with Nonwoven geotextile
Product Introduction
Combined Geogrid with Geotextile is a polypropylene extruded biaxial geogrid with a non-woven needlepunched geotextile bonded to one side.
Description of Combined Geogrid with Geotextile
Combined Geogrid with Geotextile is multi-directional geocomposites for reinforcement, combining the benefits of both geogrid and geotextiles.
Specification of Combined Geogrid with Geotextile
| BI-AXIAL GEOGRID | MD | XD | ||
| Carbon Black Content | ASTM D 4218 | % | 2.0 | |
| Ultimate Tensile Strength{1} | ASTM D 6637 | lbs/ft(kN/m) | 1645(24.0) | 1645(24.0) |
| Tensile Strength at 2% strain{1} | ASTM D 6637 | lbs/ft(kN/m) | 720(10.5) | 720(10.5) |
| Tensile Strength at 5% strain{1} | ASTM D 6637 | lbs/ft(kN/m) | 1343(19.6) | 1343(19.6) |
| Junction Efficiency{2}{3} | GRI-GC2 | % | >95 | >95 |
| Flexural Rigidity{1} | ASTM D 7748 | mg-cm | 1000000 | |
| Aperture Stability{2}{4} | US.COE | m-N/deg | 0.65 | |
| Minimum Rib Thickness | Callipered | inch(mm) | 0.07(1.7) | 0.05(1.3) |
| Aperture Size{2}{5} | Nominal | inch(mm) | 1.33(34.0) | 1.22(31.0) |
| GEOTEXTILE | ||||
| Raw Material | Polyester, Continuous filament, needle punched | |||
| Ultimate Tensile Strength{1} | ASTM D 4595 | lbs/ft(kN/m) | 781(11.4) | 781(11.4) |
| Grab Strength{1} | ASTM D 4632 | lbs(kN) | 128(0.57) | |
| Trapezoidal Tear{1} | ASTM D 4533 | lbs(kN) | 56(0.25) | |
| Elongation at Ultimate{2} | ASTM D 4595 | % | 60 | 60 |
| CBR Burst Strength{1} | ASTM D 6241 | lbs(kN) | 540(2.4) | |
| Permeability | ASTM D 4491 | cm/sec | 0.41 | |
| Apparent Opening Size O9S | ASTM D 4751 | mm | 0.12 | |
| Mass Per Unit Area{2} | ASTM D 5261 | oz/yd2(g/m2) | 6.0(200) | |
| TYPICAL ROLL DIMENSIONS | ||||
| Roll Width | ft(m) | 12.79(3.9) | ||
| Roll Length{6} | ft(m) | 164.04(50.0) | ||
Application of Combined Geogrid with Geotextile
1. Lianyi PP biaxial geogrid can be applied in all kinds of roads, railways, airports to enhance the roadbed;
2. Lianyi Biaxial Geogrid can be applied in a large car park and terminal freight yard, etc. to strenghten the foundations of a permanent load;
3. Lianyi Biaxial Geogrid can be applied in rail, road slope's protection;
4.Lianyi Biaxial Geogrid can be applied to enhance the culvert;
5. Lianyi Biaxial Geogrid can be applied as a secondary enhancement after the uniaxial Geogrid soil enhancement, further enhance the soil, prevent soil erosion.
6.Lianyi Biaxial Geogrid for mining, tunnel reinforcement.
Our Service
WE guarantee that we will reply your inquiry/email ASAP.
WE guarantee that you will get higher-quality products from us.
WE guarantee that Samples will be sent to you at the earliest.
WE guarantee that you will be served professionally and efficiently.
WE guarantee that the products will be delivered ASAP
WE guarantee that customized requirements will be accepted
Production strength
Feicheng Lianyi Engineering Plastics Co., Ltd. is a comprehensive enterprise specializing in the research, development, manufacturing, and sales of geosynthetic, plastic, and fiberglass products. Currently, the company boasts fixed assets of RMB 800 million and employs 581 staff members, 48% of whom are graduates from domestic universities. We have established long-term cooperative relationships with several research institutes, universities, and design institutes, ensuring strong technical capabilities. Our annual production capacity reaches approximately 150,000 tons.
Our products have been exported to numerous countries and regions, including South Korea, Israel, Kuwait, Thailand, Canada, Panama, and Poland etc, earning a strong reputation in the market. Our management philosophy is to provide high-quality products and excellent service to our customers. We are committed to continuous innovation and product improvement as our core development strategy. We look forward to establishing long-term cooperative relationships with you.
OUR CERTIFICATE
All our geosynthetic products are manufactured in adherence to the international standards for quality. We have laboratories and facilities where we test each product, allowing us to provide customers with data tests.
To ensure quality, we obtained different certifications including ISO9001, BBA, ISO 14001, and IVG. We are also certified by OHSAS 18001, RVS, ASQUAL, and Norgeospec.
Thus, ensuring that each product will be delivered with quality.
Our products are applied in these fields
Retaining Walls
Geogrids are polymer-based geosynthetic materials used to reinforce soil behind retaining walls, installed in horizontal layers that extend into the backfill. By stabilizing the soil mass, they enhance the structural integrity and load-bearing capacity of the wall system.
Soil Reinforcement
Geogrids and Geotextiles enhance soil stability by adding tensile reinforcement, improving strength and deformation resistance. These materials allow engineers to construct embankments on soft ground and design steeper earth slopes safely. Their reinforcing function provides crucial structural support where traditional soil alone would fail.
Drainage Systems
Geotextiles are used to prevent road base materials from penetrating into soft underlying soft subgrade, thus maintaining design thickness and roadway integrity. Geotextile separators also prevent fine-grained subgrade soils from being pumped into permeable, granular road bases
Erosion control
Geosynthetics provide immediate sediment stabilization while creating a supportive matrix for revegetation, with material selection based on site-specific hydraulic and topographical conditions. These engineered systems combine immediate erosion protection with long-term soil reinforcement, capable of withstanding high-velocity flows during both initial installation and subsequent vegetation establishment phases.
Filtration
Geotextiles retain soil particles while allowing water flow, utilizing a 'bridging' effect where larger particles help trap finer sediments, working best in one-directional flow. Their performance can be customized through fabric design and are often paired with drainage cores in geocomposites to prevent soil migration in drainage systems or protect riprap in waterways.
Mission
Our mission is to deliver innovative, high-quality geosynthetic solutions that empower sustainable development and enhance the resilience of infrastructure worldwide.
● Innovation: Continuously advancing our products and technologies to meet the evolving needs of the construction and environmental industries.
● Quality: Ensuring the highest standards of manufacturing to provide durable, reliable, and cost-effective geosynthetic materials.
● Sustainability: Promoting environmentally responsible practices by offering solutions that reduce environmental impact and support long-term ecological balance.
● Customer Focus: Building strong partnerships with our clients by understanding their unique challenges and delivering tailored solutions that exceed expectations.
● Global Impact: Contributing to the development of safer, more efficient, and sustainable infrastructure across the globe.
Can geotextiles be used with geogrids?
Request Information or Get a Quote
Lianyi welcomes the opportunity to work with you on your next infrastructure project. Click the link below to submit an electronic request or get contact information for our nearest location, and our team will get back to you promptly.
CONTACT US →GET A FREE QUOTE
RELATED PRODUCTS
One Stop Geosynthetics Manufacturer
Lianyi is a professional geosynthetics manufacturer with over 20 years of experience in the geosynthetics field.
Get expert sales advice within 12 hours.
Chat with us now for a quick response.
Wechat number
PRODUCT
